Thanks x
Toggle menu
1-800-426-9806

Shop by Category

  • Online Specials
  • Casters
  • Ergonomic Lifts
  • Hand Trucks
  • Carts & Dollies
  • Pallet Jacks
  • Storage & Warehouse

    • Shop by Brand

  • Colson
  • Hytrol
  • Magline
  • Dutro
  • Southworth
  • Footmaster
  • Lift-Rite
  • Rubbermaid
  • Albion
  • View all Brands

    • Hytrol Accumulating Roller Conveyor


    The simplest method ever devised for accumulating cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% back pressure.

    • 12 Bed Widths
    • 2% Minimum Back Pressure
    • Finger Tip Snub Roller Adjustment, No Tools Needed
    • Reversible
    • Adjustable MS-Type Floor Supports Available
    • Bed - 6-1/2" deep x 12 ga. formed steel channel frame powder painted
    • Rollers - 1.9" dia. x 16 ga. galvanized tread rollers spaced every 3" and 1.9" dia. x 16 ga. galvanized pressure rollers spaced every 6"
    • Overall Frame Widths: 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", & 42"
    • Capacity - Maximum load per linear ft. of conveyor; 150 lbs., not to exceed rated capacities
    LOAD CAPACITY CHART @ 65 FPM
    HP OVERALL FRAME WIDTHS OVERALL FRAME WIDTHS OVERALL FRAME WIDTHS
    16" TO 22" 24" TO 30" 34" TO 42"
    TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) TOTAL LOAD (LBS.)
    UP TO 100' UP TO 100' UP TO 100'
    1/2 1000 800 500
    1 2400 2200 2000

    BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. and 1.9 in. dia. pressure rollers x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt couplings.

    CROSS BRACING - Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure correct product tracking. Supplied on every other section 30 ft. bed lengths and over.

    DRIVE - Mounted underneath, placed near center of conveyor.

    DRIVE BELT - Endless B-section aramid core V-Belt drives each section of conveyor.

    RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x 1/2 bore flat idler has seven position adjustment to maintain proper V-belt tension.

    BEARINGS - Tread & pressure rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar.

    SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive shaft.

    MOTOR - 1/2 HP - 230/460V - 3 Ph. 60 Hz. Totally Enclosed C-Face.

    CONVEYING SPEED - Constant 65 FPM.

    CAPACITY - Maximum load per linear foot of conveyor 150 lbs. NOT TO EXCEED capacity in chart.

    FLOOR SUPPORTS - Now supplied as optional equipment.
    Compare Selected