Thanks x
Toggle menu
1-800-426-9806

Shop by Category

  • Casters
  • Online Specials
  • Casters by Application
  • Ergonomic Lifts
  • Hand Trucks
  • Carts & Dollies
  • Pallet Jacks
  • Storage & Warehouse

    • Shop by Brand

  • Colson
  • Hytrol
  • Magline
  • Dutro
  • Southworth
  • Footmaster
  • Lift-Rite
  • Rubbermaid
  • Albion
  • View all Brands

    • Hytrol Powered Incline Conveyor

    The Model SBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from the incline to horizontal plane. Inclines are easily adjusted up to 30°. This conveyor can also be used as a booster conveyor in gravity flow systems.

    • 3 Belt Widths
    • Center Drive
    • Reversible
    • Brake Kit
    • System Ends
    • Double Nose-over
    • Pop-Out Roller
    • Powered Feeder
    • Ceiling Hangers Available
    • Undertrussing (18", 24" & 30" OAW From Stockyard Only)
    • Adjustable MS-Type Floor Supports Available

    BELT - Black Trackmate 447 Roughtop with PVC cover. Clipper unibar lacing.

    BED - 12 ga. galvanized slider pan mounted in 6-1/2 in. x 12 ga. powder painted, formed steel channel frame. Standard 4 ft., 6 ft., 8 ft., and 10 ft. long sections bolt together with splice plates.

    DOUBLE NOSE-OVER - A 26 in. long horizontal and a 12 in. long nose-over section provides a two-step transition of product from incline to horizontal. Provides up to 30° incline adjustment.

    LOWER POWERED FEEDER - Chain type driven from tail pulley of inclined conveyor. Supports not included in base price.

    CENTER DRIVE - Located on the incline section. Chain guard located on left hand side.

    DRIVE PULLEY - 8 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned and fully lagged.

    TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.

    TAKE-UP PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.

    TAKE-UP - Take-ups in center drive provides 16 in. of belt take-up.

    SNUB IDLER/NOSE-OVER ROLLERS     - Adjustable 2-1/8 in. dia. or 2-1/2 in. dia. pre-lubricated ball bearings. Snub guards included.

    RETURN IDLER - Adjustable 1.9 in. dia., pre-lubricated ball bearings.

    BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail and take-up pulley.

    SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.

    MOTOR - 1 HP - 230/460V - 3 Ph. 60 Hz. Totally Enclosed C-Face with brake kit.

    BELT SPEED - Constant 65 FPM.

    CAPACITY - Maximum load per linear foot of conveyor 100 lbs. NOT TO EXCEED capacity in charts.

    FLOOR SUPPORTS - Now supplied as optional equipment.
    BR BELT
    WIDTH    		 OAW FEEDER
    LENGTH
    13" 10" 16" 35-1/2"
    15" 12" 18"
    17" 14" 20" 50-1/2"
    19" 16" 22"
    21" 18" 24"
    23" 20" 26"
    25" 22" 28"
    27" 24" 30" 67-1/2"
    31" 28" 34" 79-1/2"
    33" 30" 36"
    37" 34" 40" 91-1/2"
    39" 36" 42"
    LOAD CAPACITY CHART
    25° INCLINE @ 65 FPM W/ROUGHTOP BELT
    HP BELT
    WIDTHS
    TO    		 LENGTHS UP TO
    14' 44'
    DISTRIBUTED LOAD (LBS.)
    1 22"
    30"
    36"    		 605
    595
    585    		 585
    565
    545
    2 22"
    30"
    36"    		 1245
    1235
    1225    		 1225
    1205
    1185
    Compare Selected